2026.11.17

Meet the BAIZE PRO: Six Colours, One New Hardtail Starting Point

Meet the BAIZE PRO: Six Colours, One New Hardtail Starting Point

New product · Mountain biking · BAIZE PRO

Your Next Hardtail Starts Here

A bare frame leaves room for possibilities. Before there is a fork, a pair of wheels or even a saddle, you can already picture the bike you want to build. The new OG-EVKIN BAIZE PRO starts that conversation with a clean hardtail silhouette and six colour schemes.

The orange, black and white version in these photographs makes a strong first impression. Look closer, though, and the practical choices become just as interesting as the paint.

OG-EVKIN BAIZE PRO mountain bike frame launch in orange black and white
Introducing the BAIZE PRO, shown in its orange, black and white finish.

A Frame with a Clear Visual Direction

The top tube slopes towards the seat tube, while the broad down tube gives the main triangle a distinct outline. Slim rear stays keep the back of the frame visually light. With no rear shock or suspension linkage, the hardtail layout puts those lines on full display.

On this finish, bright orange leads from the head tube into the top tube. Black anchors the lower front triangle, and white picks out the rear stays. The dotted transitions soften the changes in colour; the large down-tube lettering follows the frame rather than competing with it.

BAIZE PRO carbon frame showing head tube and bottom bracket
The front triangle shows the sculpted tube junctions and the orange-to-black paint transition.

The Foundation: Carbon and 29-Inch Wheels

The BAIZE PRO uses Toray T800 carbon fibre. OG-EVKIN lists a frame weight of 1,030 ±50 g; that is a frame figure, not the weight of a finished bicycle. It is a 29er platform with clearance listed for tyres up to 2.4 inches. Rear spacing is Boost 148 ×12 mm, with a thru-axle.

For a build, wheel size sets the starting point for wheel and tyre selection. Clearance still needs checking with the actual rim and tyre fitted. Tread, pressure and riding position will help shape the finished bike's feel; a frame specification alone cannot describe a ride.

Discover the BAIZE PRO →

Angled view of the BAIZE PRO orange black and white frame
An angled view reveals the rear triangle and bottom-bracket area before components are installed.

Parts Choices Worth Getting Right

The specification calls for a threaded BSA73 bottom bracket, a 31.6 mm seatpost and a headset with 52 mm upper and lower bearing seats. It lists a 160 mm disc-brake setup, a maximum single chainring of 38T, and support for both Di2 and mechanical shifting.

These details are useful when turning an idea into a parts list. Match the bottom bracket to the crank as well as the frame, and check the chosen brake, headset and drivetrain components with your builder. For a steep local loop, the gearing you choose can matter more to your day than how impressive the parts look on paper.

Side view of the BAIZE PRO hardtail mountain bike frame
The side profile keeps the frame's sloping top tube and contrasting rear stays easy to see.

Three Sizes, Six Ways to Make It Yours

Sizes are listed as 15-inch (S), 17-inch (M) and 19-inch (L). The package includes the frame, clamp, headset, hanger and axle. Published maximum load is 120 kg, with a two-year warranty.

Start sizing with the geometry chart and your fit requirements. A familiar size letter is a useful reference, but reach, saddle position and the planned cockpit deserve a closer look before ordering.

Six BAIZE PRO frame colour schemes
All six colour schemes together, from restrained monochrome to brighter contrasting finishes.

The six finishes give the same shape quite different personalities. The white option emphasises the silhouette; the dark option lets it recede. Orange brings warmth, while the turquoise and pink, blue and purple combinations offer more contrast. These are visual descriptions of the supplied colour image; the product page identifies the choices as Painting 1 through Painting 6.

What Would Your BAIZE PRO Look Like?

Imagine a hardtail built around your regular rides: tyres chosen for the ground you know, gearing for the climb you always meet, and a cockpit that puts you in a comfortable position. There is plenty to decide, which is part of the appeal of starting with a frame.

Would you let a bright frame lead the build, or choose a quieter colour and add your own accents? Explore the six finishes and specifications, then start putting your BAIZE PRO together on paper.

Discover the BAIZE PRO →

← Back to OG-EVKIN Articles

Comments

No comments yet. Be the first to share your ride story.

Leave a comment

LATEST Articles

Meet the BAIZE PRO: Six Colours, One New Hardtail Starting Point

2026.11.17

Meet the BAIZE PRO: Six Colours, One New Hardtail Starting Point

Meet the new OG-EVKIN BAIZE PRO carbon 29er frame: a closer look at its design, six colour schemes and the specifications to plan your next hardtail build.

LOONG in Golden Light: A Road Bike Build with Its Own Character

2026.11.14

LOONG in Golden Light: A Road Bike Build with Its Own Character

A burgundy LOONG beneath an orange sky offers a fresh look at road-bike colour, clean design and the choices that make a build personal.

Mud on the KYLIN PRO, a Smile for the Camera

2026.11.13

Mud on the KYLIN PRO, a Smile for the Camera

Two photographs of @nicoluythekook and the KYLIN PRO inspire a closer look at gravel tyres, cockpit setup and the small details that make a build your own.

Inside This KYLIN PRO Build, From Cockpit to Storage

2026.11.12

Inside This KYLIN PRO Build, From Cockpit to Storage

A closer look at a white KYLIN PRO gravel build, including its VIPERS and COUGAR cockpit, FIDLOCK storage cover, tyres and photographed scale reading.